In the example given, the calculation would be 152 + 62 = 16.2.
You should also consider the structural integrity, ventilation,and insulation requirementsfor your doghouse.
Check with local regulations to find out if you need a building permit for the doghouse.
Credit: Hassan Merheb / EyeEm / Getty Images
While you’re checking regulations, pay close attention to your region’s laws regarding leaving dogs outside.
This will help you visualize the dimensions better while you are building.
Refer to the measurements in your plan to determine exactly what it’s crucial that you build the doghouse.
Measure and cut two long 2x4s equal to the planned length of the doghouse.
Also measure and cut three shorter 2x4s, equal to the planned width of the doghouse.
Put the remaining shorter piece into the center to provide additional support in the middle of the floor.
Step 3: plant the Insulated Floor
The floor of the doghouse will be made of plywood.
Measure and cut a piece of plywood to fit over the base frame.
Measure and cut four 2x4s that can serve as the corner posts for the doghouse.
Check the measurements on your plan and cut these four 2x4s to the height of the walls.
You will also need to cut four more 2x4 pieces that match the dimensions of the base.
Build the rectangular roof base with the remaining four 2x4s that match the floor base.
Secure the top of each corner post to the roof base.
Secure the pieces together at the center and fasten them to the roof base with 112-inch screws.
Repeat this process for the back of the doghouse.
Measure and cut two 2x4s to spin up the length of the roof peak.
Secure the support beam to the triangular frame with two 3-inch screws at each end.
If it holds up, you might begin to secure the plywood walls and roof.
Top off the doghouse by measuring and cutting the plywood panels for the roof.
ensure that the panels are large enough to extend over the sides of the structure to create an overhang.
Secure the panels to the roof joists with 112-inch screws.
Remember also that your dog shouldn’t be left outdoors during these periods of extreme weather.
Position the doghouse in a shaded space that is relatively sheltered from the sun, wind, and rain.
This careful positioning helps to protect your dog from high summer temperatures, heavy rainfall, and blowing winds.
It should be made from a non-absorbent material so urine or water doesn’t soak into it.
A dog house doesn’t need to have a window.
However, adding a window will help create better ventilation, temperature regulation, and lighting for your pet.
However, you should avoid placing it underneaththick branchesthat could cause harm if they were to fall.
