Learn how to safely install a porch light to make your home safer while boosting its curb appeal.
Get started with our steps below.
While basic wiring is suitable for many DIYers, it can be dangerous and calls for extreme caution.
Credit:BHG / Kevin Norris
Installing vs.
Adjust the hole placement as needed.
If mounting two lights, run a wire from light to light.
Credit:BHG / Kevin Norris
Slide the end of the wire through the light boxs integrated clamps, leaving 8 to 10 inches exposed.
Install Light Hardware
Use the provided screws to fasten the mounting straps to the light box.
Use a level to ensure the mounting strap is level.
Credit:BHG / Kevin Norris
Use wire strippers to strip 3/4-inch from each wire.
Install a bulb and check the function of the light.
Confirm the power is off with a voltage tester after turning off the main breaker.
Credit:BHG / Kevin Norris
To save energy andincrease your homes security, consider installing a programmable switch to control your porch light.
Credit:BHG / Kevin Norris
Credit:BHG / Kevin Norris
Credit:BHG / Kevin Norris
Credit:BHG / Kevin Norris
