As landscaping equipment goes, a weed whacker is one of the most versatile power tools to have around.
First, find out what to keep in mind when choosing the best weed whacker for your landscaping needs.
First, think about whether you want a plug-in, battery-powered, or gas-powered model.
Credit: CasarsaGuru / Getty Images
Plug-in weed whackers are relatively quiet and powerful.
And being electric, there’s no exhaust to contend with or trips to the gas station for fuel.
A second electric option is a battery-powered weed trimmer.
Battery-powered weed whackers areperfect for smaller yardsor light duty work.
Overly thick grass or large areas can prove to be a bit too much for the batteries to handle.
Finally, gas-powered weed whackers are a third option.
Often larger and heavier than electric alternatives, gas-powered trimmers are the preferred option for commercial maintenance crews.
Then, before turning on your weed whacker, cover as much exposed skin as possible.
These machines are best for right-handed users.
Trimmers designed to spin clockwise will fling debris to the right and cut best on the left.
These types tend to be better for left-handed people.
As weed trimmers spin, a thin nylon string slices through plants.
double-check you have about 6 inches of string extending from the machine.
Then, aim to do most of your trimming with the tip of that string.
Otherwise, operating a weed whacker is relatively simple.
Just hold the business end steady and keep your movements as smooth as possible for the best trim.
Then, use the following techniques towhip your whole landscape into shape.
Then move along the edge of the area.
This technique involves holding your weed whacker at roughly a 10 degree angle and moving from side to side.
EdgingUse this technique to create a defined borderbetween two different areas with a narrow gap.
For example, you might want to do this between your lawn and the sidewalk or curb.
Begin edging on one side and move along in a single direction until finished.
You might want to do this in preparation forfurther cutting with a lawnmower, for example.
When scything, begin by holding the trimmer at about the top third of the vegetation.
Then move the head back and forth.
After the first layer has been trimmed, another third can then be removed in the same way.
