This easy method requires only a few power tools and features a handy track system.
Drill a pilot hole at each mark.
Insert a screw clip into each hole; do not overtighten.
Credit: Richard Leo Johnson
Repeat on all four sides of your window.
After the top and bottom channels are installed, measure, cut, and plant the side channels similarly.
Fasten Screen to Tracks
Cut a piece of fiberglass screen a few inches larger than the opening.
Starting at the top of the opening, lay the screen across the top channel track.
Insert the spline into the bottom channel track last.
Trim Porch Screen
If needed, remove the spline and adjust the screen.
Trim excess screen mesh flush along each edge using a utility knife.
Credit: Jason Donnelly
Credit: Jason Donnelly
Credit: Jason Donnelly
